• Description

 

What are Clipless Pedals, and why are they called that?

 

Back in the old days (fairly recently), cyclists used clips and straps on their pedals, along with stiff soled shoes with cleats that located the shoe on the pedal, preventing fore and aft movement. To sprint or climb, the toe straps were pulled tight, enabling the rider to pull up on the pedals without pulling their foot off the pedal. However, having the straps tight is pretty uncomfortable, and they need to be undone before dismounting. Then Look adapted their ski bindings to design a pedal and cleat for cyclists which did away with the toeclip and strap, but fixed the shoe on the pedal with a cleat that prevented the shoe from pulling up off the pedal as well as preventing fore and aft movement. You disengaged from the pedal by twisting your foot out rather than pulling it out. This system was an instant success, offering the performance of a tight-pulled toe strap and clip, but without the discomfort and without the need to release the strap before dismounting. Because it got rid of the older clip and strap, that style of pedal was called clipless. So today, even though most pedals either have no foot retention system or have a binding that a cleat clips into, the ones that you clip into are called clipless.

Since Look's first clipless pedals, there have been much evolution in clipless pedal systems. They can currently be divided into two broad categories - road and mountain.