Other Fixed Price Jobs

THIS PAGE PROBABLY WON'T MAKE A GREAT DEAL OF SENSE UNTIL WE DO SOME MORE WORK ON IT.

Adjust Brakes
+
UNDER CONSTRUCTION
!

service/adjust?

rim/disc?

cable/hydro?

additional labour for parts replacement?

 

Adjust Gears (no parts needed)
+
LAG
!

Labour charge to adjust gears on a bike without replacing parts.

Replacing parts will incur an additional labour charge, as well as the cost of the parts themselves.

     WORKSHOP PROCEDURE - ADJUST GEARS

  • Check derailleur hanger alignment and tightness
  • Check that rear derailleur is correctly attached and tight
  • Check rear derailleur B-tension screw adjustment
  • Check that front derailleur is correctly positioned (height and alignment) and tight
  • Lubricate cables where they exit casings
  • Lubricate front and rear derailleur pivots
  • Lubricate rear derailleur jockey wheels
  • Scrape excess grime and dirt from chainrings, rear sprockets and jockey wheels
  • Check chain lubrication; wipe with rag and lubricate as necessary
  • Check gear levers are positioned properly and tight
  • Check gear lever operation and lubricate if necessary
  • Adjust front and rear derailleur stops
  • Adjust front and rear derailleur cable tension to allow swift and reliable shifts

Adjust Gears Replacing Parts As Needed
Parts Extra
+
LAGP
!

Labour charge to adjust gears on a bike, including the labour involved in replacing cable/s, derailleur/s, shifters, derailleur hanger,chain, rear sprockets and chainrings as needed.

Parts additional.

WORKSHOP PROCEDURE - ADJUST GEARS & REPLACE PARTS AS NEEDED

  • Check derailleur hanger alignment and tightness
  • Check rear derailleur for alignment and function; replace if necessary with a compatible derailleur of similar quality
  • Check that rear derailleur is correctly attached and tight
  • Check front derailleur for damage or excessive wear. Replace if necessary.
  • Check that front derailleur is correctly positioned (height and alignment) and tight
  • Check cables for excessive friction, corrosion or visible damage to cables or casings; replace inner cables complete with compatible outer casing as needed.
  • If cables don't need replacing, lubricate cables where they exit casings
  • Check chain for corrosion, damage or excessive wear. Replace if excessively corroded, twisted or stretched more than 1% in length.
  • If replacing a worn chain, replace rear sprockets also and give chainrings a visual check for excessive wear.
  • Lubricate front and rear derailleur pivots (unless derailleur/s replaced)
  • Lubricate rear derailleur jockey wheels (unless derailleur/s replaced)
  • Scrape excess grime and dirt from chainrings, rear sprockets and jockey wheels
  • Check chain lubrication; wipe with rag and lubricate as necessary
  • Check gear levers are positioned properly and tight
  • Check gear lever operation and lubricate or replace if necessary
  • Adjust front and rear derailleur stops
  • Adjust front and rear derailleur cable tension to allow swift and reliable shifts
  • Adjust rear derailleur B-tension screw for minimum clearance from rear sprockets

Fit Electric Conversion Kit to Bike
+
FCEC
!
This charge applies to Electric Conversion Kits that we sell.
There is no fixed fitting charge for electric conversion kits bought elsewhere.

Fit Full-Length Mudguards to Bike
+
FCM
!
This fee applies only to full-length mudguard fitting. There is often some custom bracket designing and fitting and the job can take a couple of hours of workshop time.
If fitting mudguards to a bike you're buying from us (or for fitting within the free service period) we'll reduce the charge to $30.

Fit Hydraulic Disc Brake to Bike (per end)
+
FCHDB
!
Labour charge to fit a new Shimano Hydraulic disc brake that we have sold (either front or rear; not both) including shortening hydraulic line as necessary.
Does not include the cost of adaptor if needed.

Fit Tyre and/or Tube to Bike (1 wheel only)
+
FCR1
!

Labour charge to fit a tyre and/or tube to either the front or back wheel of a bicycle.

A Full Service includes fitting of tyres and tubes and so this charge does not apply in addition to a Full Service.

Fit Tyre and/or Tube to Bike (2 wheels)
+
FCR2
!
Labour charge to fit a tyre and/or tube to both the front and rear wheels of a bicycle.

A Full Service includes fitting of tyres and tubes and so this charge does not apply in addition to a Full Service.

Fit Tyre and/or Tube to Wheel Only
+
FCRW
!
Labour charge to fit a tyre and/or tube to a bare wheel.

Safety Check
+
UNDER CONSTRUCTION
!

For us to be able to assure you your bike is safe, we need to carry out a Full Service. It is difficult to be sure of a bike's safety without going over it thoroughly (ie, giving it a Full Service).

However, we're happy to give an on-the-spot casual opinion (if time allows) when you bring your bike in to us whether or not it should be serviced, or what other work might want doing.

This could be rebadged a Basic Service - lube/pump/adjust gears & brakes.