100% Silicone Grips. Mark's favourite and reputed by many to be the best there is. Lightweight, comfortable, durable, and very stable on the handlebars (comparable with lock-ons).
- Length: 130mm.
- Installed Diameter: 32mm.
- 1 set of end caps included.
- Thick/Thin Design: One side is thick for absorbing shock and vibration, the other side is thinner for bulk-reducing comfort.
- Memory: Silicone has memory: When you grab an ESI Grip you get a custom mould of your hand for a no-slip ride every time.
- GripShift or Custom Sizes: You can cut ESI Grips with sharp scissors or a utility knife. Hold next to your bar and cut leaving an extra 3mm in length.
- "Chunky" style rather than "Racer's Edge" style recommended for use with GripShift for a smooth transition between grip and shifter.
Installation: Clean handlebars. Push in end caps. Using rubbing alcohol or Windex, clean inside of ESI MTB Grips, wet bar and inside of grip, slide onto bar. Rotate grip to have the thicker side toward palm. Let dry for 24 hours. Or, use a compressor!
Removal: Slide a screwdriver with a dulled point (or similar) under grip (careful not to scratch bar or stretch grip); squirt rubbing alcohol, Windex or water under grip, twist grip off bar. Clean inside of grip with rubbing alcohol or Windex and reinstall. Or, if you have access to a compressor, just blow them off.
For more information, click here.
