Enduro
1948

Enduro Bearing 6901 Max

Inner Diameter: 12mm. Outer Diameter: 24mm. Width: 6mm.

Fits some Mavic front and rear wheels. Weight: 11g.

Enduro Max Bearings

Maximum quantity of Grade 10 Chromium Steel Balls - Enduro MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity. No retainer means these bearings have 40 percent more capacity. The balls must be filled by hand, through a precision slot ground into the inner and outer race.

52100 High Carbon Chromium Alloy Races - purest alloy steel with toughness like no other.

Grease - MAX bearings use CRC Marine Grease, will not wash out or break down under any extreme circumstances. Even salt water will not penetrate or break it down.

LLU Seals: Two sealing lips on each seal, which ride in a matching groove on the inner race to make a labyrinth seal. the outer sealing lip repels dirt and water while the inner retains grease. These seals essentially form a "hydromatic seal" of grease when in operation, the grease forming a barrier in the groove.

 

Fits:

  • Mavic Cosmic Carbone Ultimate SL 09 Front Wheel
  • Mavic R-Sys (+ Premium) Front Wheel
  • Mavic Ksyrium SL 08 (+ Premium) Front Wheel
  • Mavic Crossmax SLR Front Wheel
  • Mavic Crossmax SL Disc 07 Front Wheel
  • Mavic Cosmic Carbone Ultimate Rear Wheel (Left Side)
  • Mavic R-Sys Rear Wheel (Left Side)
  • Mavic R-Sys Premium Rear Wheel (Left Side)