Shipping Weight: 435g.
For a moe efficient and more comfortable pedal stroke, the Keo 2 Max has a cleat contact area 12% larger than the Keo Carbon. To further improve the transfer of power and to improve the longevity of the pedal, this surface is made of stainless steel moulded directly into the pedal body.
At 130g (single pedal), the Keo 2 Max is a very light pedal. (122g in the carbon version).
Reliability: Much attention was focused on reliability and this has resulted in a carbon injected pedal body, a stainles steel cleat contact area and an oversized axle with dual seals; this pedal is built to last.
The new line of Keo 2 Max pedals maintains a low cleat contact height even with the use of a steel oversized axle. The pedal is built with two miniature ball bearings (12mm inner & 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg load at the centre of the pedal and an eccentric rotation (replicating a bump each revolution). This test surpasses current standards by a wide margen.
Dual seals increase bearing longevity.
Adjustable Q-Factor: Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately. Use of these washers results in a Q-factor of 55mm versus the original 53mm.
Supplied with a pair of grey cleats.
