Wheels Mfg
rc07

Wheels Mfg Cone R108

Wheels Manufacturing Cone #108. Suits Shimano Rear Hubs FH-4400, FH-3300, WH-M535, WH-M540, WH-M550, WH-M560, WH-M561, WH-M580 (drive side). Also suits 1980's-era Suntour hubs, and, we expect, along with an axle of standard M10 thread, old Campagnolo hubs (1980s and earlier).

Thread: 10mm x 1mm (standard quick-release rear axle). Cone Depth: 12.5mm. Cone Diameter: 16.9mm.

This cone replaces Shimano Part Number Y3BH02100 - rear right cone M10 x 12.7mm, which is no longer available. The slight difference is depth (0.2mm) should present no problem).

We recommend always replacing the balls when servicing a hub or replacing cones.

A hub that uses this cone will use 1/4" balls x 18 (9 per side).

We recommend using Grade 5 balls (top quality balls) with these cones.

You can use the links on the right to go directly to the recommended balls - either individually or in the relatively economical pack of 50.