Pump Spares

Hoses, needles, adaptors, washers, clips.

AFA Pump Hose Presta
+
41922
!
pump hose

This has the small threaded end for presta (skinny with nut, or French) valves or woods (old-fashioned, or English) valves.

AFA brand for quality. Made in France. Weight: 10g.

AFA Pump Hose Schrader
+
41921
!
pump hose
The Schrader is the larger, or Car, or American valve.
AFA brand for quality. Made in France. Weight: 10g.

Ball Inflator Needle
+
54106
!
ball-inflator-needle
This ball inflator needle has a schrader-sized thread so you simply attach your pump to it and insert it into the ball to pump it up.
 Weight: 5g.

Silca Track Pump Disc Adaptor
+
41953
!
Silca Track Pump Disc Adaptor
Allows access to valve in a disc wheel. Suits Presta Valve only.
Shipping Weight: 50g.

Silca Track Pump Plunger Washer
+
41955
!
Silca Plunger Washer
It's leather.

Outer Diameter: 28mm.

Weight: 2g.

Silca Track Pump Valve Washer Large
+
41956
!
Silca large valve washer
Diameter: 20.5mm. Depth at centre: 8mm. Thickness at edge: 4.2mm. Suits current model Silca floor pumps. Weight: 3g.

Silca Track Pump Valve Washer Small
+
41954
!
silca valve washer small

Outside Diameter: 12.8mm. Height: 8.4mm. Weight: 1g.

Topeak Joe Blow Sport Checking Valve
+
41962
!
Non-return valve for the Topeak Joe Blow Sport Floor Pump.
Dimensions: 40mm Long x 8mm Diameter. The black part is rubber. Weight: 1g.

Topeak Pressure Rite
+
54104
!
topeak-pressure-rite
An anti air loss connector for air spring forks & shocks and small wheel valves (12" & 14").

Made of brass. Size: 25mm x 10mm x 38mm.

Weight: 15g.

Topeak Pump Clip Mini Master Blaster
+
41963
!
Pump Clip for Topeak Mini Master Blaster Pumps.
Fits Topeak Mini Master Blaster (TMMB2) or Mini Master Blaster with gauge (TMMB2G). Weight: 45g.

Topeak Pump Clip Mountain Morph
+
00294 (D6)
!
Replacement pump clip to suit the Topeak Mountain Morph Pump (TMP2)

Complete with screws to attach to bottle cage mounts (under the bottle cage) and also with reusable zip ties allowing attachment just about anywhere else on the bike. Length: 84mm. Internal clip diameter: 25mm. Weight: 8g.

Topeak Pump Clip Road
+
41964
!
Topeak Pump Clip for Topeak narrow bore (road) mini pumps.

Suits Topeak TPMB1 (Pocket Rocket Master Blaster), TSMB1 (Speed Master Blaster), TPMBDX (Pocket Rocket Master Blaster DX), TMRAL (Micro Rocket AL Master Blaster), TMRCB (Micro Rocket CB Master Blaster). Weight: 10g.

Topeak Pump Rebuild Kit Master Blaster
+
41965
!
Topeak rebuild kit for Master Blaster pumps.

Suits: Pocket Rocket Master Blaster (TPMB-1) & Speed Master Blaster (TSMB-1) pumps. Weight: 9g.

Topeak Rebuild Kit for Joe Blow Sprint
+
00537
!
Replacement valve washers and caps, and pump O-ring for the excellent Topeak Joe Blow Sprint floor pump.
Shipping Weight: 13g.

Topeak Track Pump Hose Twinhead
+
41961
!
 Replaces existing floor pump head and hose with Topeak’s unique and easy to install dual head and hose. Converts from schrader to presta valve at the flip of a lever.
Twinhead valve adaptor works on all valve types. Aluminium thumblock lever ensures air tight seal. Extra long rubber hose easily reaches tyres in repair stand. Easy to use and easy to install. Size: 1060mm x 45mm x 53mm. Weight: 175g.

Topeak Valve Extender Presta
+
54102
!
Machined aircraft aluminium Presta Valve extender with rubber seal. For deep section rims.

43mm long. Only 1 extension included.

Weight: 4g.

Valve Key
+
54108
!
valve-key
This is the tool for removing and installing Schrader valves. I doubles as a valve cap.

 

Weight: 3g.

Zefal Pump Clips Monobloc XXL
+
41912
!
If the XL isn't long enough, this should do the job. For tube diameter 25mm to 60mm. If you need to go bigger again, a Zebra stainless steel hose clamp can be used along with the pump peg to do the job. Weight: 14g.