Univega Derailleur Hangers

The derailleur hanger is a part of the frame, not of the derailleur. There are many different brands of bike in the world, made in many different factories, and finding the right hanger for a bike is not always easy.

A visual check will generally be enough to find the hanger you need, but we have also included information from Wheels Manufacturing (who's range of hangers we keep in stock) regarding which models of bicycle each hanger fits. This information was updated in January 2013, so will not cover later model years until this site is updated. Please use the model listing as confirmation only of your choice of derailleur hanger; a visual comparison should be the primary way to get the correct hanger.

If you can't find the hanger you're after on this brand-specific page, or can't find your brand of bike listed, then try your luck in the All Derailleur Hangers page - but beware - there are almost 200 hangers there.

Chances are we'll have the hanger you need, but, sadly, there will always be some bikes out there with hangers we do not carry, and for which Wheels Manufacturing don't make a replacement. In these cases, please refer to a dealer in the relevant brand of bike.

Wheels Mfg Derailleur Hanger 25

WMDH025
!
Fits some bicycle models from Access, Avanti, Bergamont, Bianchi, Blue, BMC, Boardman, Brodie, Cinelli, Claud Butler, Commencal, Cube, Cyclewolf, DaBomb, Dawes, Diamondback, Falcon, Felt, Focus, FRW, Fuji, Gravity, Haro, Hasa, Iron Horse, Jeep, K2, KHS, Kona, Leader, Marin, Masi, Merida, Mongoose, Motiv, Next, Norco, Novara, On One, Optima, Orbea, Pinarello, Planet X, Redline, Rocky Mountain, Salsa, Scattante, Schwinn, Shogun, Transition, Trek, Univega, Van Dessel, Voodoo, Wheeler and Wilier.

 Weight (including attachment hardware): 20g.

Wheels Mfg Derailleur Hanger 38

WMDH038
!

Fits some bicycle models from Avanti, Bianchi, Blue, Boardman, Commencal, Cube, Diamondback, Felt, Focus, Fuji, GT, Haro, IronHorse, Jamis, Jeep, K2, Kona, Marin, Merida, Mongoose, Motobecane, Novara, Raleigh, Redline, Schwinn, Trek, Univega, Ventana and Wheeler.

Weight (including attachment hardware): 18g.

Wheels Mfg Derailleur Hanger 43

WMDH043
!
Fits some bicycle models from Nishiki, Raleigh and Univega.

 

Weight (including attachment hardware): 24g.

Wheels Mfg Derailleur Hanger 44

WMDH044
!
Fits some bicycle models from IronHorse, Raleigh and Univega.

 

Weight (including attachment hardware): 20g.

Wheels Mfg Derailleur Hanger 45

WMDH045
!
Fits some bicycle models from Apollo, Cervelo, Decathlon, Devinci, Diamondback, Falcon, IronHorse, Jeep, K2, Marin, Mongoose, Nishiki, Raleigh, Schwinn and Univega.

 

Weight (including attachment hardware): 24g.

Wheels Manufacturing Derailleur Hanger 48

Special Order
WMDH048
!
Fits some bicycle models from Diamondback, Falcon and Univega.

PLEASE NOTE: We no longer keep this hanger in stock but you can order it from us and we should be able to get it in for you (subject to availablility). Please allow an extra week or two for delivery.

Weight (including attachment hardware): 21g.

Wheels Mfg Derailleur Hanger 49

WMDH049
!
Fits some bicycle models from Argon 18, Avanti, Azonic, Barracuda, Bianchi, Blue, BMC, Boardman, Brodie, Commencal, Cube, Dawes, Diamondback, Electra, Falcon, Focus, Fondriest, Fuji, GT, IronHorse, Jamis, Kestrel, KHS, Kona, Kuota, Leader, Leopard, Look, Marin, Masi, Merida, Mondraker, Motobecane, Neuvation, Norco, Novara, Orbea, Planet X, Quintana Roo, Raleigh, Redline, Ridley, Rocky Mountain, Scattante, Schwinn, Scott, Tommaso, Transition, Univega, Van Dessel and Vilano.

Weight (including attachment hardware): 20g.

Wheels Manufacturing Derailleur Hanger 97

Special Order
WMDH097
!
Fits some bicycle models from Barracuda, BH, Bianchi, Diamondback, Falcon, IronHorse, KHS, Trek, Univega and Wheeler.

PLEASE NOTE: We no longer keep this derailleur hanger in stock but you can order it from us and we should be able to get it in for you, with a delay of 1 to 2 weeks.

Weight (including attachment hardware): 24g.

Wheels Mfg Derailleur Hanger 120

WMDH120
!

Fits some bicycle models from Avanti, Fuji, Jamis, Norco, Pinarello, Stevens and Univega.

NOTE: The mounting holes on Hanger #120 are 18mm apart, centre to centre. Do not confuse this hanger with Hanger #138.

Weight (including attachment hardware): 16g.

Wheels Mfg Derailleur Hanger 58

WMDH058
!
Fits some bicycle models from Canyon, DeRosa, Focus, Fondriest, Fuji, IronHorse, KHS, Kona, Marin, On One, Orbea, Planet X, Primus Mootry, Raleigh, Salsa, Stevens and Univega. Can be forced to work with some bicycle models from Diamondback.
Weight (including attachment hardware): 15g.